All You Need to Prepare for Your New Flooring Installation in Greater Sydney

Pre-Installation Checklist

Painting – all painting should be completed and cured to reduce damage during installation.
Skirting boards – should be painted to the subfloor to prevent exposure when the flooring is replaced.
Door clearances – check if doors must be cut or planed to clear new flooring height.
Wiring and pipes – please advise where wiring, gas and water pipes are located to avoid damage during installation. All wiring must be laid according to the Australian Safety Standards by a qualified technician.
Underfloor heating – advise us if you have underfloor heating to ensure the correct underlay is used.

Access – arrange parking, access and lifts for the day of installation
Subfloors – ensure all debris is removed and the subfloor is vacuumed and ready for installation.
Existing Carpet – existing carpet must be vacuumed before take up and removal by our installers.
Organise for professional movers to move Grand Pianos and Billiard Tables
Furniture – areas must be cleared of furniture unless previously arranged to be moved by our installers.
All furniture must be emptied of all contents.
Beds must be stripped if they require removal from the room.
Remove all breakables, antiques and valuables from installation areas.
Disconnect all electrical devices (e.g. TV, stereo system, computers etc).
You will need to direct our installers when returning furniture.
Our installers are not responsible for moving furniture up or down stairs.

Electricity – needs to be available on-site.
Parking & Access – close parking is necessary in addition to safe entry to carry materials.
Clear Areas – installation area must be clear of other tradesmen, children and animals to ensure everyone’s safety.
Fire & Security Alarms – smoke detectors must be isolated
Underfloor heating – ensure heating is disconnected and reconnected after installation by a qualified electrician.

Prepare for a Flawless Installation. Follow Our Checklist Today!